Tree climbing is an emerging adventure and people usually climb tall trees by using specialized equipment. People climb trees for various purposes, hunting is one of them. There are some techniques to follow when tree climbing spurs for hunting one of several methods. This is the most well-known technique to climb trees and tree service technicians used spur climbing as it has been the traditional method from the past.
Tree workers or climbers use this technique for their fast efficiency. Climbers use spikes for their safety. When one climbs trees, the safety depends on spikes, quality. So, it is necessary to choose the suitable and the best spikes set. Though the use of spurs causes damage to trees, they use it for the physical safety of climbers. Besides, one can keep both him and trees safe by using alternatives.
Advantages of spike climbing
The advantage of spur climbing means the advantage of the climbers. For climbing trees, spur climbing is one of the best techniques. In spur climbing equipment, there have been several recent innovations and improvements through the basic technique has changed very little over the years. People use this technique to climb trees for many purposes such as hunting, research, animal rescue, and activism. Tree climbing spur is fast and efficient as a climbing technique.
One can truly be safe by using spurs if he has practice and physical strength. Although there are various methods to climb trees, people want to complete their work or fulfill their purpose easily and quickly. And by using the spur climbing method, they can do that according to their requirements. As spurs damage harm to trees, there are some exceptional situations where climbers can use spikes or spurs which is appropriate. Such as.
*When the tree is being removed, only then climbers can use spurs.
*If there is no means of climbing the tree, and when the branches are more than throw line distance apart.
*When the tree is closer to power lines and climbers cannot access the tree by other means.
Climbing trees using spikes is helpful for those climbers who do not want to take any kind of risk. If any climber is looking for the best way of climbing, sure climbing is appropriate for him. Because every material helps a climber to climb with proper safety.
Disadvantages of spike climbing
Despite having advantages, spur climbing has some disadvantages. When pruning a live tree, they are not intended for use. Using tree spikes can cause damage to a living tree in several ways. In trees climbing spurs create holes needlessly and these holes can damage some vital tissue of the tree which is calling cambium. The holes which are using climbing spikes allow a site of entry for wood decay organisms. Besides, infected climbing spikes can transfer some disease organisms from diseased trees to healthy trees.
The holes in trees can diminish the dollar value of your trees. While climbing trees, some unprofessional tree care workers continue to use climbing spikes that they only intend to prune. While pruning a tree, people should not use tree spikes and we have known it for all over 100 years. The improper use of tree spikes causes harm to trees. The sharpened iron teeth of these tools make wounds to trees and it helps to grow injurious sites of trees. When climbers or three workers use spikes on living trees, these create unnecessary damage to the tree.
For these disadvantages of spur climbing, it has forbidden to use these tree climbing for spikes. These cause significant damage to living trees. And if this abuse continues, our trees from which we get oxygen, their extinction will continue to occur and it will devastate the environment.
Spur climbing process for Hunting
1. Pre-climb inspection
It is necessary for inspecting the tree, and its surroundings, before climbing the tree. Then look for something that could pose a danger, including indications of rot or other defects in the tree. That could be conks or another fungus on the trunk, mushrooms near the base of the tree, cracks or cavities in the tree. Also, from the ground for hangers, dead branches, and stinging insects, one should survey the crown of the tree. Then once in the tree, if things do not go as planned, maybe you cannot get back down safely. For the entire climb, you must have a plan from the beginning to the end.
2. Ascending
After completing the pre-climb inspection, start climbing using the lineman’s belt as a flip line, strap on the spurs, and saddle. Throw one end of the lineman’s belt around the tree and start catching it. On the opposite side of the saddle, connect the carbine to the D-ring. Then to gain buy on the trunk, use the spurs and the flip line to keep from falling backward away from the tree. Then you need to stab the gaff of the spur into the tree and step up onto it. The main tactics will be to release the tension on it and flipping it up, advance the lineman’s belt up to the trunk every 2 or 3 steps up to keep pace with you.
3. Tying In
In this stage, your first taken step will be to secure the tree strap to the trunk overhead, once you arrive at hunting height. Then connect it to the rope bridge on the saddle. Now you have to adjust the lengths of the tree strap, and the rope bridge to your liking. Then do check, making sure the connection is secure. After checking the connection, make sure it is safe to settle your weight into the saddle, and then the step is to unclip the lineman’s belt and removing the spurs and stow them away.
4.Descending
After completing the three stages mentioned above, you can think your hunt is over, and you must get back to the ground safely. Using the tree climbing spurs, you must back-climb the trunk, and also the lineman’s belt. If this is not impossible, then this is tough to do than going up. Step down on your spurs, after lowering the lineman’s belt.
Conclusion
Finally, we know that to all that tree climbing spurs for hunting are one of the most well-known techniques to climb tall trees. This method has advantages and some disadvantages. If any climber wants to climb trees easily and want to stay safe then, he should use proper spikes. Besides, he should have enough knowledge about spikes, and their disadvantages in living trees. Otherwise, a climber can use any alternative so he can be safe and keep trees away from significant damage.
Leave a Reply